Technical Data Extraction and Representation in Expert CAPP System

Authors

  • Rafik Elaakil Department of Mechanical Engineering, Faculty of Sciences and Technics of Tangier, Ancienne Route de l’Aéroport, Km 10, Ziaten. BP : 416. Tanger - Maroc
  • Rechia Ahmed Department of Mechanical Engineering, Faculty of Sciences and Technics of Tangier, Ancienne Route de l’Aéroport, Km 10, Ziaten. BP : 416. Tanger - Maroc
  • Abdelilah El Mesbahi Department of Mechanical Engineering, Faculty of Sciences and Technics of Tangier, Ancienne Route de l’Aéroport, Km 10, Ziaten. BP : 416. Tanger - Maroc
  • Oussama Jaider Department of Mechanical Engineering, Faculty of Sciences and Technics of Tangier, Ancienne Route de l’Aéroport, Km 10, Ziaten. BP : 416. Tanger - Maroc

DOI:

https://doi.org/10.14738/tmlai.54.2974

Keywords:

CAD/CAM, CAPP, machining operation sequencing, Expert system, knowledge bases, Artificial intelligence

Abstract

Computer-aided process planning (CAPP) is an essential interface for linking design and manufacturing processes, the purpose of CAPP is to transform a part design specification obtained from CAD system into a sequence of machining operations which can be used by CAM system involving the selection of necessary manufacturing processes in order to transform a designed part into a final part economically and competitively.This paper focus on the extraction of tolerances (GD&T) and their association to the related features embedded into an expert CAPP system.

References

(1) Antonio Armillotta,A method for computer-aided specification of geometric tolerances,Dipartimento di Meccanica, Politecnico di Milano, ViaLa Masa 1, 20156 Milano, Italy, Computer-Aided Design 45 (2013) 1604–1616.

(2) Mehmet I. Sarigecili , Utpal Roya,Interpreting the semantics of GD&T specifications of a product for tolerance analysis, Computer-Aided Design 47 (2014) 72–84.

(3) OntoSTEP Plug-in. July, 2012. http://www.nist.gov/el/msid/ontostep.cfm.

(4) ISO_10303-11, Industrial automation systems and

integration — Product data representation and exchange —Part 11: Description methods: The EXPRESS language.

(5) ISO_10303-21, Industrial automation systems andintegration — Product data representationand exchange —Part 21: Implementation methods: Clear textencoding of the exchange structure.

(6) Pei Lei, Lianyu Zheng,A STEP-NC compatible on-machine measurement system with automated correlation of inspection data. Applied Mechanics and Materials Vols. 397-400 (2013) pp 1772-1777

(7) HakkiEskicioglu, The Use of Expert System Building Tools in Process Planning, Middle East Technical University, Ankara, 1992, Engineering Applications of Artificial Intelligence.Vol. 5, No. 1, pp. 33-42, 1992.

(8) JaiderOussama, al. Int. Journal of Engineering Research and Applications ISSN : 2248-9622, Vol. 4, Issue 5( Version 1), May 2014

(9) STEP Application Protocol (AP) 203 editions 1 & 2,Configuration Controlled 3D Designs of Mechanical Partsand Assemblies, ISO10303 1994, (2007) & (2009).

(10) http://step-nc-machine.software.informer.com/9.1/

(11) http://www.steptools.com/

Downloads

Published

2017-09-01

How to Cite

Elaakil, R., Ahmed, R., El Mesbahi, A., & Jaider, O. (2017). Technical Data Extraction and Representation in Expert CAPP System. Transactions on Engineering and Computing Sciences, 5(4). https://doi.org/10.14738/tmlai.54.2974

Issue

Section

Special Issue : 1st International Conference on Affective computing, Machine Learning and Intelligent Systems